{"$schema":"https://findrisk.net/checklists/schema.json","schemaVersion":1,"id":"full-body-harness-inspection-checklist","version":1,"date":"2026-10-29T23:06:28+03:00","category":"equipment","industries":["general","construction","manufacturing","energy-utilities","oil-gas","warehouse-logistics"],"frequency":"before-each-use","page":{"en":{"slug":"full-body-harness-inspection-checklist","title":"Harness Inspection Checklist: Full Body Harness and Lanyard","description":"Free harness inspection checklist: pre-use checks for webbing, stitching, D-rings, buckles, lanyard and fit, based on OSHA 1910.140, HSE and Turkish rules.","intro":"A **harness inspection checklist** is the check a worker makes on a full body harness, lanyard and connectors before putting them on, and the record a competent person uses for the periodic detailed inspection. It covers the label and inspection status, webbing and stitching, metal parts, the lanyard and energy absorber, and the fit and connection before work starts. A harness that fails a critical check is taken out of service.\n\nIn the United States, OSHA 29 CFR 1910.140(c)(18) requires personal fall protection systems to be inspected before initial use during each workshift, and 1926.502(d)(21) requires construction fall arrest systems to be inspected before each use. In the UK, HSE guidance INDG367 recommends a tactile and visual pre-use check every time, plus a recorded detailed inspection at least every six months. In Türkiye, the PPE Use Regulation requires PPE to be checked before every use and to be maintained and periodically inspected according to the manufacturer's instructions.\n\nThis form does not replace the manufacturer's instructions or the detailed inspection by a competent person, and a harness only protects as part of a system with a suitable anchor and a rescue plan. For the full pre-task check and inspection intervals, see our [working at height checklist](/blog/working-at-height-safety-checklist); for choosing the right equipment, see the [PPE hazard assessment guide](/blog/ppe-hazard-assessment-guide).","howToUse":["Check the harness yourself before each use, and hand it to a competent person for the detailed inspection at the interval in your inspection regime.","Do the condition checks in good light before putting the harness on: pass every strap slowly through your hands, then check the metal parts and the lanyard.","Put the harness on and complete the fit and connection checks before you go to the work position.","Mark each check Pass, Fail or N/A and photograph any defect.","If a critical check fails, do not use the harness: label it \"Do not use\", take it out of service and hand it to your supervisor or the competent person.","Keep the completed form with the harness's inspection record."],"faqs":[{"question":"How often should a full body harness be inspected?","answer":"Before every use, by the person wearing it. OSHA 1910.140(c)(18) requires an inspection before initial use during each workshift. HSE guidance INDG367 adds a recorded detailed inspection by a competent person at least every six months, or at least every three months for frequent use in arduous work such as scaffolding. Follow the manufacturer's instructions if they ask for more."},{"question":"Who is allowed to inspect a safety harness?","answer":"The user does the pre-use check by touch and by eye. Detailed inspections are done by a competent person: OSHA describes one as someone able to identify hazards and authorised to take prompt corrective action, and HSE says the inspector should be impartial and have the authority to discard defective equipment."},{"question":"Can a harness be used again after a fall?","answer":"Not until a competent person has inspected it. OSHA 1910.140(c)(17) requires equipment that has been impact-loaded to be removed from service immediately and not used again until a competent person finds it undamaged and safe. HSE is stricter for lanyards: one that has arrested a fall should never be reused."},{"question":"Which defects mean a harness must be taken out of service?","answer":"Cuts, fraying, broken fibres, burns, chemical or UV damage to the webbing; pulled or broken stitching; bent, cracked or corroded D-rings and buckles; a missing or unreadable label; and an energy absorber that has started to deploy. HSE notes that a 1 mm cut at the edge of webbing can reduce its strength by 5 to 40% depending on the make."},{"question":"Where should the D-ring be on a full body harness?","answer":"In the centre of the back, between the shoulder blades and near shoulder level. OSHA 1910.140(c)(22) requires this position for fall arrest and allows a front (sternal) attachment only where free fall is limited to 2 feet (0.6 m)."}],"tags":["harness inspection","full body harness","fall protection","lanyard inspection","OSHA 1910.140","working at height"]},"tr":{"slug":"parasut-tipi-emniyet-kemeri-kontrol-listesi","title":"Paraşüt Tipi Emniyet Kemeri Kontrol Listesi ve Formu","description":"Ücretsiz paraşüt tipi emniyet kemeri kontrol listesi: kayış, dikiş, D halkası, toka, lanyard ve giyme kontrolleri; KKD mevzuatı, OSHA ve HSE'ye dayalı form.","intro":"**Paraşüt tipi emniyet kemeri kontrol listesi**, tam vücut kemerini, lanyardı ve bağlantı elemanlarını kullanacak çalışanın kemeri giymeden önce yaptığı kontrol ve yetkin kişinin ayrıntılı periyodik kontrolde kullandığı kayıttır. Etiket ve kontrol durumu, kayışlar ve dikişler, metal parçalar, lanyard ve enerji sönümleyici ile çalışmaya başlamadan önceki giyme ve bağlanma kontrollerini kapsar. Kritik bir maddeden geçemeyen kemer kullanım dışı bırakılır.\n\nKişisel Koruyucu Donanımların İşyerlerinde Kullanılması Hakkında Yönetmelik'e göre KKD her kullanımdan önce kontrol edilir, bakım, onarım ve periyodik kontrolleri imalatçının kullanım kılavuzuna uygun olarak yapılır ve arızalı donanım arıza giderilmeden kullanılmaz. ÇSGB'nin yüksekte çalışma rehberi de kişisel düşmeyi durdurucu sistemin tüm bileşenlerinin her kullanımdan önce gözle kontrol edilmesini ve inceleme tarihinin kayda geçirilmesini ister. ABD'de OSHA 1910.140 her vardiyada ilk kullanımdan önce kontrolü zorunlu tutar.\n\nBu form üreticinin talimatlarının ve yetkin kişinin ayrıntılı kontrolünün yerine geçmez; kemer ancak uygun bir ankraj ve kurtarma planıyla birlikte koruma sağlar. Çalışma öncesi kontrollerin tamamı ve kontrol aralıkları için [yüksekte çalışma kontrol listemize](/blog/working-at-height-safety-checklist), doğru donanımı seçmek için [KKD tehlike değerlendirmesi rehberimize](/blog/ppe-hazard-assessment-guide) bakabilirsiniz.","howToUse":["Kemeri her kullanımdan önce kendiniz kontrol edin; ayrıntılı periyodik kontrol için kontrol programında belirlenen aralıklarla yetkin kişiye verin.","Durum kontrollerini kemeri giymeden, iyi ışıkta yapın: her kayışı ellerinizin arasından yavaşça geçirin, ardından metal parçaları ve lanyardı kontrol edin.","Kemeri giyin ve çalışma noktasına geçmeden önce giyme ve bağlanma maddelerini tamamlayın.","Her maddeyi Uygun, Uygun değil veya Kapsam dışı olarak işaretleyin; her kusurun fotoğrafını çekin.","Kritik bir madde uygun değilse kemeri kullanmayın: \"Kullanmayınız\" etiketi asın, kullanım dışı bırakın ve amirinize ya da yetkin kişiye teslim edin.","Doldurulan formu kemerin kontrol kaydıyla birlikte saklayın."],"faqs":[{"question":"Paraşüt tipi emniyet kemeri ne sıklıkla kontrol edilmeli?","answer":"Her kullanımdan önce. KKD Kullanımı Yönetmeliği KKD'nin her kullanımdan önce kontrol edilmesini, periyodik kontrollerin de imalatçının kullanım kılavuzuna göre yapılmasını ister. İngiltere'de HSE, en az altı ayda bir, ağır koşullarda sık kullanılan ekipmanda ise en az üç ayda bir kayıtlı ayrıntılı kontrol önerir."},{"question":"Emniyet kemerinin periyodik kontrolünü kim yapar?","answer":"Kullanım öncesi kontrolü kemeri kullanan kişi yapar. Ayrıntılı kontrolü ise hasarı tanıyabilen ve kusurlu ekipmanı kullanımdan kaldırma yetkisi olan yetkin bir kişi yapar. ÇSGB rehberi bu incelemelerin düzenli yapılmasını ve tarihinin kayda geçirilmesini ister; HSE de kontrol edenin tarafsız olmasını ve ekipmanı ıskartaya ayırma yetkisine sahip olmasını önerir."},{"question":"Düşmeyi durdurmuş emniyet kemeri tekrar kullanılır mı?","answer":"Yetkin kişi incelemeden kullanılmaz. ÇSGB rehberine göre bir düşmeden sonra sistemin tüm bileşenleri yetkin kişi tarafından ayrıntılı incelenir; zarar görmediğine ve tekrar kullanılabileceğine dair imzalı rapor yoksa sistem kullanımdan çıkarılır. HSE, düşme durdurmuş bir lanyardın asla yeniden kullanılmamasını söyler."},{"question":"Hangi kusurlar emniyet kemerini kullanım dışı bırakır?","answer":"Kayışta kesik, saçaklanma, kopmuş lif, yanık, kimyasal veya UV hasarı; çekilmiş ya da kopmuş dikiş; eğilmiş, çatlamış veya paslanmış D halkası ve tokalar; okunmayan etiket ve açılmaya başlamış enerji sönümleyici. HSE'ye göre kenardaki 1 mm'lik bir kesik bile dayanımı markaya göre %5 ile %40 arasında düşürebilir."},{"question":"Emniyet kemerinde CE işareti ve Türkçe kullanım kılavuzu zorunlu mu?","answer":"Evet. KKD Kullanımı Yönetmeliği, KKD Yönetmeliği kapsamındaki ürünlerde CE işareti ve Türkçe kullanım kılavuzu bulunmasını ister. ÇSGB rehberine göre yüksekten düşmeye karşı KKD kategori III'tür ve CE işaretinin yanında onaylanmış kuruluşun dört haneli kimlik numarası yer almalıdır."}],"tags":["emniyet kemeri kontrolü","paraşüt tipi emniyet kemeri","yüksekte çalışma","KKD","kullanım öncesi kontrol","düşme durdurma"]}},"roles":{"completedBy":{"en":"Harness user or competent person","tr":"Kemeri kullanan kişi veya yetkin kişi"},"approvedBy":{"en":"Supervisor","tr":"Amir"}},"header":[{"id":"site","label":{"en":"Site / area","tr":"İşyeri / alan"},"type":"text"},{"id":"harness-id","label":{"en":"Harness ID / serial number","tr":"Kemer no / seri numarası"},"type":"text"},{"id":"make-model","label":{"en":"Manufacturer and model","tr":"Üretici ve model"},"type":"text"},{"id":"manufacture-date","label":{"en":"Date of manufacture","tr":"Üretim tarihi"},"type":"date","required":false},{"id":"last-detailed-inspection","label":{"en":"Last detailed inspection","tr":"Son ayrıntılı periyodik kontrol"},"type":"date","required":false},{"id":"lanyard-id","label":{"en":"Lanyard ID (if checked with the harness)","tr":"Lanyard no (kemerle birlikte kontrol ediliyorsa)"},"type":"text","required":false},{"id":"inspection-type","label":{"en":"Inspection type","tr":"Kontrol türü"},"type":"select","options":[{"id":"pre-use","label":{"en":"Pre-use check (user)","tr":"Kullanım öncesi kontrol (kullanıcı)"}},{"id":"detailed","label":{"en":"Detailed inspection (competent person)","tr":"Ayrıntılı periyodik kontrol (yetkin kişi)"}},{"id":"interim","label":{"en":"Interim inspection","tr":"Ara kontrol"}}]},{"id":"inspected-at","label":{"en":"Date and time","tr":"Tarih ve saat"},"type":"datetime"}],"sections":[{"id":"label-records","title":{"en":"Label and records","tr":"Etiket ve kayıtlar"},"items":[{"id":"label","text":{"en":"The harness label is present and legible, showing the manufacturer, model, serial or batch number and date of manufacture","tr":"Kemer etiketi yerinde ve okunaklı; üretici, model, seri veya parti numarası ve üretim tarihi görülebiliyor"},"guidance":{"en":"A harness without a readable label cannot be matched to its inspection record: withdraw it.","tr":"Etiketi okunmayan kemer kontrol kaydıyla eşleştirilemez; kullanımdan çekin."},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","csgb-yuksekte","miller-guide"]},{"id":"ce-marking","text":{"en":"The harness carries the CE marking with the four-digit notified body number","tr":"Kemerin üzerinde CE işareti ve yanında onaylanmış kuruluşun dört haneli kimlik numarası var"},"guidance":{"en":"Applies in the EU and Türkiye, where fall protection PPE is Category III; instructions for use in the local language must also be available. Mark N/A elsewhere.","tr":"Yüksekten düşmeye karşı KKD kategori III'tür; Türkçe kullanım kılavuzu da bulunmalıdır."},"response":"pass-fail-na","photo":"required-on-fail","refs":["kkd-kullanim","csgb-yuksekte"]},{"id":"detailed-in-date","text":{"en":"A detailed inspection by a competent person is recorded and still within the interval set in the inspection regime","tr":"Yetkin kişinin yaptığı son ayrıntılı periyodik kontrol kayıtlı ve belirlenen süre dolmamış"},"guidance":{"en":"HSE recommends at least every 6 months, and at least every 3 months for frequent use in arduous work; follow the manufacturer if stricter. Withdraw a harness with no record of inspection in the last 6 months.","tr":"Süre, imalatçının kullanım kılavuzuna göre belirlenir. HSE en az 6 ayda bir, ağır koşullarda sık kullanımda en az 3 ayda bir ayrıntılı kontrol önerir."},"response":"pass-fail-na","critical":true,"refs":["hse-indg367","kkd-kullanim","csgb-yuksekte"]},{"id":"service-life","text":{"en":"The harness is within the service life set by the manufacturer or your company","tr":"Kemer, üreticinin veya işyerinin belirlediği kullanım süresi içinde"},"guidance":{"en":"Compare the date of manufacture on the label with the service-life policy.","tr":"Etiketteki üretim tarihini belirlenen kullanım süresiyle karşılaştırın."},"response":"pass-fail-na","refs":["kkd-kullanim","miller-guide"]},{"id":"not-fall-loaded","text":{"en":"The harness has not arrested a fall, and any fall indicator is intact","tr":"Kemer bir düşmeyi durdurmamış; varsa düşme göstergesi sağlam"},"guidance":{"en":"Equipment that has arrested a fall stays out of service until a competent person has inspected it and found it safe.","tr":"Düşme durdurmuş ekipman, yetkin kişi inceleyip tekrar kullanılabileceğini imzalı raporla belirlemeden kullanılmaz."},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["osha-1910-140","osha-1926-502","hse-indg367","csgb-yuksekte","miller-guide"]},{"id":"no-modification","text":{"en":"There are no user modifications: no extra holes, knots or repairs not approved by the manufacturer","tr":"Kemerde kullanıcının yaptığı değişiklik yok: ek delik, düğüm veya üreticinin onaylamadığı onarım bulunmuyor"},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","kkd-kullanim","miller-guide"]}]},{"id":"webbing","title":{"en":"Webbing and stitching","tr":"Kayışlar ve dikişler"},"description":{"en":"Pass every strap slowly through your hands in good light. Bend it into an inverted U to open up cuts, and check both sides along its full length.","tr":"Her kayışı iyi ışıkta ellerinizin arasından yavaşça geçirin. Kesiklerin görünmesi için kayışı ters U şeklinde bükün ve tüm uzunluğu boyunca iki yüzünü de kontrol edin."},"items":[{"id":"cuts","text":{"en":"Webbing has no cuts, nicks or tears, including small cuts at the edges","tr":"Kayışlarda kesik, çentik veya yırtık yok; kenarlardaki küçük kesikler dahil"},"guidance":{"en":"HSE notes that a 1 mm cut at the edge can reduce strength by 5 to 40% depending on the make.","tr":"HSE'ye göre kenardaki 1 mm'lik bir kesik bile, markaya göre dayanımı %5 ile %40 arasında düşürebilir."},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","csgb-yuksekte","osha-1910-140"]},{"id":"fraying","text":{"en":"Webbing has no fraying, broken fibres or abrasion on its face, edges or loops","tr":"Kayışların yüzeyinde, kenarlarında ve halkalarında saçaklanma, kopmuş lif veya aşınma yok"},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","csgb-yuksekte","miller-guide"]},{"id":"heat-damage","text":{"en":"There are no burns, melted, glazed or hardened areas from heat or friction","tr":"Isı veya sürtünmeden kaynaklanan yanık, erime, parlaklaşma ya da sertleşme yok"},"guidance":{"en":"Heat-damaged fibres look glazed and feel harder than the webbing around them.","tr":"Isıdan zarar görmüş lifler parlak görünür ve çevresindeki kayışa göre daha sert hissedilir."},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","csgb-yuksekte","miller-guide"]},{"id":"chemical-damage","text":{"en":"There is no chemical damage: no soft, flaking or discoloured areas","tr":"Kimyasal hasar yok: yumuşamış, pul pul dökülen veya renk değiştirmiş bölge bulunmuyor"},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","csgb-yuksekte"]},{"id":"uv-damage","text":{"en":"There are no signs of UV damage, such as faded colour or a powdery surface","tr":"Solmuş renk veya tozlu yüzey gibi UV hasarı belirtileri yok"},"guidance":{"en":"UV damage is hard to see. If in doubt, withdraw the harness for a detailed inspection.","tr":"UV hasarı gözle zor fark edilir. Şüphe varsa kemeri ayrıntılı kontrol için kullanımdan çekin."},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","csgb-yuksekte"]},{"id":"contamination","text":{"en":"Webbing is free of mildew, paint, dirt, grit and sand","tr":"Kayışlarda küf, boya, kir, kum veya toz birikintisi yok"},"guidance":{"en":"Grit works into the fibres and wears them from inside. Clean as the manufacturer instructs; withdraw heavily contaminated webbing for review.","tr":"Kum ve kir liflerin arasına girerek kayışı içten aşındırır. Üretici talimatına göre temizleyin; yoğun kirlenmiş kemeri inceleme için kullanımdan çekin."},"response":"pass-fail-na","photo":"required-on-fail","refs":["hse-indg367","osha-1910-140","miller-guide"]},{"id":"stitching","text":{"en":"Load-bearing stitching is intact, with no pulled, cut, broken or missing stitches","tr":"Taşıyıcı dikişler sağlam; çekilmiş, kesilmiş, kopmuş veya eksik dikiş yok"},"guidance":{"en":"Check the stitch patterns around the D-rings and where the leg, chest and back straps join.","tr":"D halkaları çevresindeki ve bacak, göğüs, sırt kayışlarının birleştiği yerlerdeki dikiş desenlerine bakın."},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","csgb-yuksekte","miller-guide"]}]},{"id":"hardware","title":{"en":"Metal parts","tr":"Metal parçalar"},"items":[{"id":"d-rings","text":{"en":"D-rings have no bends, cracks, breaks or sharp or rough edges","tr":"D halkalarında eğilme, çatlak, kırık, pürüzlü veya keskin kenar yok"},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["csgb-yuksekte","osha-1910-140","miller-guide"]},{"id":"d-ring-pivot","text":{"en":"The back D-ring pivots freely and its back pad is undamaged","tr":"Sırttaki D halkası serbestçe hareket ediyor ve sırt yastığı hasarsız"},"response":"pass-fail-na","photo":"required-on-fail","refs":["csgb-yuksekte"]},{"id":"buckles","text":{"en":"Buckles and adjusters are not bent, distorted, cracked or unusually worn","tr":"Tokalar ve ayar elemanları eğilmemiş, şekli bozulmamış, çatlamamış ve olağandışı aşınmamış"},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["csgb-yuksekte","miller-guide"]},{"id":"buckle-function","text":{"en":"Every buckle fastens, locks and holds its strap without slipping","tr":"Her toka düzgün takılıyor, kilitleniyor ve kayışı kaydırmadan tutuyor"},"guidance":{"en":"On tongue buckles, the tongue overlaps the frame and moves freely, and the strap holes (grommets) are undamaged.","tr":"Dilli tokalarda dil çerçevenin üzerine oturmalı ve serbestçe hareket etmeli; kayış delikleri (kuşgözleri) hasarsız olmalı."},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["csgb-yuksekte","miller-guide"]},{"id":"corrosion","text":{"en":"Metal parts are free of rust and corrosion","tr":"Metal parçalarda pas veya korozyon yok"},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["csgb-yuksekte","osha-1910-140","miller-guide"]}]},{"id":"lanyard","title":{"en":"Lanyard, energy absorber and connectors","tr":"Lanyard, enerji sönümleyici ve bağlantı elemanları"},"description":{"en":"Check the lanyard you will use with this harness. Mark N/A if it is inspected on its own form.","tr":"Bu kemerle kullanacağınız lanyardı kontrol edin. Lanyard ayrı bir formla kontrol ediliyorsa Kapsam dışı işaretleyin."},"items":[{"id":"lanyard-condition","text":{"en":"The lanyard webbing or rope has no cuts, abrasion, damaged stitching or knots","tr":"Lanyard kayışında veya halatında kesik, aşınma, hasarlı dikiş ya da düğüm yok"},"guidance":{"en":"Pass the whole lanyard through your hands, as for the harness. Its label must also be legible.","tr":"Kemerde olduğu gibi lanyardın tamamını ellerinizin arasından geçirin. Etiketi de okunaklı olmalıdır."},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","osha-1910-140","csgb-yuksekte"]},{"id":"energy-absorber","text":{"en":"The energy absorber cover is intact and the absorber has not started to deploy","tr":"Enerji sönümleyicinin kılıfı sağlam ve sönümleyici açılmaya başlamamış"},"guidance":{"en":"Look for tear webbing pulled out of the pack, or a damaged or displaced cover.","tr":"Paketten dışarı çıkmış yırtılma kayışına veya hasarlı, yerinden kaymış kılıfa bakın."},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","csgb-yuksekte"]},{"id":"connectors","text":{"en":"Snaphooks and karabiners are not bent, cracked, deformed or corroded","tr":"Kancalar ve karabinalar eğilmemiş, çatlamamış, şekli bozulmamış ve paslanmamış"},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["hse-indg367","osha-1910-140"]},{"id":"gate-lock","text":{"en":"Connector gates close and lock by themselves and need two separate actions to open","tr":"Kanca ve karabina kapakları kendiliğinden kapanıp kilitleniyor ve açmak için iki ayrı hareket gerekiyor"},"response":"pass-fail-na","critical":true,"photo":"required-on-fail","refs":["osha-1910-140","osha-1926-502","hse-indg367"]},{"id":"compatible","text":{"en":"The lanyard and connectors are compatible with the harness attachment point and the anchor","tr":"Lanyard ve bağlantı elemanları kemerin bağlantı noktası ve ankrajla uyumlu"},"guidance":{"en":"A snaphook must be sized for the part it connects to.","tr":"Kanca, bağlandığı parçaya uygun boyutta olmalıdır."},"response":"pass-fail-na","critical":true,"refs":["osha-1910-140","osha-1926-502"]}]},{"id":"fit-connection","title":{"en":"Fit and connection (before work)","tr":"Giyme ve bağlanma (çalışmaya başlamadan önce)"},"description":{"en":"Mark N/A during a detailed inspection away from the work position.","tr":"Çalışma noktası dışında yapılan ayrıntılı kontrolde Kapsam dışı işaretleyin."},"items":[{"id":"full-body","text":{"en":"A full body harness is used for fall arrest, not a body belt","tr":"Düşme durdurma için bel kemeri değil, tam vücut (paraşüt tipi) emniyet kemeri kullanılıyor"},"response":"pass-fail-na","critical":true,"refs":["osha-1910-140","csgb-yuksekte"]},{"id":"size-fit","text":{"en":"The harness is the right size and adjusted to fit the wearer snugly","tr":"Kemer kullanan kişiye uygun bedende ve vücuda tam oturacak şekilde ayarlanmış"},"response":"pass-fail-na","refs":["kkd-kullanim","csgb-yuksekte"]},{"id":"leg-straps","text":{"en":"Both leg straps are fastened and tightened","tr":"İki bacak kayışı da takılmış ve sıkılmış"},"response":"pass-fail-na","critical":true,"refs":["csgb-yuksekte"]},{"id":"chest-strap","text":{"en":"The chest strap is fastened across the middle of the chest","tr":"Göğüs kayışı göğsün ortasında takılmış"},"response":"pass-fail-na","refs":["csgb-yuksekte"]},{"id":"d-ring-position","text":{"en":"The back D-ring sits between the shoulder blades, near shoulder level","tr":"Sırttaki D halkası kürek kemiklerinin arasında, omuz hizasına yakın duruyor"},"response":"pass-fail-na","refs":["osha-1910-140","osha-1926-502","csgb-yuksekte"]},{"id":"strap-ends","text":{"en":"Loose strap ends are tucked in and not left hanging","tr":"Kayışların serbest uçları toplanmış, sarkık bırakılmamış"},"response":"pass-fail-na","refs":["csgb-yuksekte"]},{"id":"anchor","text":{"en":"The lanyard is connected to an anchor suitable for fall arrest, not to a guardrail or scaffold member","tr":"Lanyard düşme durdurmaya uygun bir ankraja bağlı; korkuluğa veya iskele elemanına bağlanmamış"},"guidance":{"en":"OSHA: 5,000 lb (22.2 kN) per person attached, or designed by a qualified person with a safety factor of at least two.","tr":"ÇSGB rehberi korkuluklara ve iskele bileşenlerine bağlanmaktan mümkün olduğunca kaçınılmasını, daha uygun ankraj noktası seçilmesini ister."},"response":"pass-fail-na","critical":true,"refs":["osha-1910-140","csgb-yuksekte"]},{"id":"clearance","text":{"en":"There is enough clear distance below the worker for the lanyard, energy absorber and harness stretch","tr":"Çalışanın altında lanyard, enerji sönümleyici ve kemer esnemesi için yeterli boş mesafe var"},"guidance":{"en":"ÇSGB guide: with a lanyard and energy absorber, allow 2 × lanyard length (including the absorber) + 1.75 m + 1 m safety margin, plus harness stretch. OSHA limits free fall to 6 ft (1.8 m).","tr":"ÇSGB rehberine göre lanyard ve enerji sönümleyiciyle azami düşme mesafesi: 2 × bağlantı uzunluğu (sönümleyici dahil) + 1,75 m + 1 m güvenlik payı; buna kemerin esneme payı eklenir."},"response":"pass-fail-na","critical":true,"refs":["csgb-yuksekte","osha-1910-140"]},{"id":"rescue","text":{"en":"A rescue plan is in place to reach a worker suspended in the harness promptly","tr":"Kemerde asılı kalan çalışana hızla ulaşmak için bir kurtarma planı hazır"},"guidance":{"en":"The ÇSGB guide also asks that a worker using fall arrest is watched or accompanied by another worker.","tr":"ÇSGB rehberi, düşmeyi durdurucu sistem kullanan çalışanın acil durum için başka bir çalışan tarafından izlenmesini veya ona eşlik edilmesini de ister."},"response":"pass-fail-na","critical":true,"refs":["osha-1910-140","osha-1926-502","csgb-yuksekte"]}]},{"id":"result","title":{"en":"Result","tr":"Sonuç"},"items":[{"id":"tagged-out","text":{"en":"If a critical check failed, the harness is labelled \"Do not use\", taken out of service and passed to a competent person","tr":"Kritik bir madde uygun değilse kemere \"Kullanmayınız\" etiketi asıldı, kullanım dışı bırakıldı ve yetkin kişiye teslim edildi"},"response":"yes-no-na","critical":true,"refs":["hse-indg367","osha-1910-140","kkd-kullanim"]},{"id":"defects-reported","text":{"en":"Every defect found has been reported to the supervisor","tr":"Tespit edilen her kusur amire bildirildi"},"response":"yes-no-na","refs":["kkd-kullanim","miller-guide"]},{"id":"recorded","text":{"en":"The result is entered in the harness's inspection record","tr":"Kontrol sonucu kemerin kontrol kaydına işlendi"},"response":"yes-no-na","refs":["hse-indg367","csgb-yuksekte"]},{"id":"notes","text":{"en":"Notes and defects found","tr":"Notlar ve tespit edilen kusurlar"},"response":"text","required":false}]}],"signOff":[{"role":{"en":"Inspected by (user or competent person)","tr":"Kontrol eden (kullanıcı veya yetkin kişi)"}},{"role":{"en":"Supervisor","tr":"Amir"}}],"references":[{"id":"kkd-kullanim","jurisdiction":"TR","title":"Kişisel Koruyucu Donanımların İşyerlerinde Kullanılması Hakkında Yönetmelik (Resmî Gazete, 02.07.2013, 28695)","url":"https://www.mevzuat.gov.tr/MevzuatMetin/yonetmelik/7.5.18540.pdf","note":{"en":"Art. 6(1)(a) fit, CE marking and Turkish instructions; 6(1)(c) period of use; 6(1)(e) maintenance and periodic checks per the manufacturer's instructions; 7(2)(b) modifications; 8(3) report defects, check before every use.","tr":"Md. 6(1)(a) kullanana uyma, CE işareti ve Türkçe kılavuz; 6(1)(c) kullanılma süresi; 6(1)(e) imalatçı kılavuzuna göre bakım ve periyodik kontrol; 7(2)(b) değişiklik; 8(3) arızanın bildirilmesi, her kullanımdan önce kontrol."}},{"id":"csgb-yuksekte","jurisdiction":"TR","title":"ÇSGB, Yapı İşlerinde Yüksekte Çalışmalarda İş Sağlığı ve Güvenliği Uygulama Rehberi (2018)","url":"https://www.csgb.gov.tr/Media/s0jnggut/yap%C4%B1-i%C5%9Flerinde-y%C3%BCksekte-%C3%A7al%C4%B1%C5%9Fmalarda-isg-uygulama-rehberi.pdf","note":{"en":"3.3.4 personal fall arrest systems (pre-use check, anchors, after a fall, clearance); Annex 1: harness inspection (webbing, D-rings, buckles, labels), donning, lanyards and energy absorbers.","tr":"3.3.4 kişisel düşmeyi durdurucu sistemler (kullanım öncesi kontrol, ankraj, düşme sonrası, azami düşme mesafesi); Ek-1: tam vücut kemerinin muayenesi (şerit, D halkası, toka, etiket), giyilmesi, lanyard ve enerji emiciler."}},{"id":"osha-1910-140","jurisdiction":"US","title":"OSHA 29 CFR 1910.140, Personal fall protection systems","url":"https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.140","note":{"en":"(c)(1)–(2) connectors; (c)(9) locking connectors; (c)(13) anchorages; (c)(17) impact loading; (c)(18) inspection before initial use each workshift; (c)(19) compatibility; (c)(21) rescue; (c)(22) attachment point; (d)(2)(ii) free fall; (d)(3) body belts prohibited.","tr":"(c)(1)–(2) bağlantı elemanları; (c)(9) kilitli kancalar; (c)(13) ankrajlar; (c)(17) darbe yükü; (c)(18) her vardiyada ilk kullanımdan önce kontrol; (c)(19) uyumluluk; (c)(21) kurtarma; (c)(22) bağlantı noktası; (d)(2)(ii) serbest düşme; (d)(3) bel kemeri yasağı."}},{"id":"osha-1926-502","jurisdiction":"US","title":"OSHA 29 CFR 1926.502, Fall protection systems criteria and practices","url":"https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.502","note":{"en":"(d)(5) locking snaphooks sized for the connection; (d)(17) attachment point; (d)(19) impact loading; (d)(20) rescue; (d)(21) inspection before each use.","tr":"(d)(5) bağlantıya uygun boyutta kilitli kancalar; (d)(17) bağlantı noktası; (d)(19) darbe yükü; (d)(20) kurtarma; (d)(21) her kullanımdan önce kontrol."}},{"id":"hse-indg367","jurisdiction":"UK","title":"HSE INDG367, Inspecting fall arrest equipment made from webbing or rope","url":"https://www.hse.gov.uk/pubns/indg367.pdf","note":{"en":"Pre-use checks, detailed and interim inspections, examples of defects, withdrawal from use; cites the BS EN 365 twelve-monthly examination.","tr":"Kullanım öncesi kontrol, ayrıntılı ve ara kontroller, kusur örnekleri, kullanımdan çekme; BS EN 365'teki en az on iki ayda bir muayeneye atıf."}},{"id":"miller-guide","jurisdiction":"US","title":"Miller (Protective Industrial Products), Harness End-User Pre-Use Inspection Guide + Daily Checklist (2026)","url":"https://us.pipglobal.com/archive/literature/2026-Miller-Harness-Inspection-Guide.pdf","note":{"en":"Manufacturer guidance: label and service life, fall indicator, webbing, stitching and hardware stop-use criteria.","tr":"Üretici kılavuzu: etiket ve kullanım süresi, düşme göstergesi, kayış, dikiş ve metal parçalarda kullanımı durdurma kriterleri."}}],"relatedPosts":["working-at-height-safety-checklist","ppe-hazard-assessment-guide"]}